can am diagnostics

[BIG ANT]

does anybody have or know wher to get hold of the can am diagnosic software and lead so i don have to trape to the dealer every time it need the oil changing??

all ideas are welcome!!

[Allen]

does anybody have or know wher to get hold of the can am diagnosic software and lead so i don have to trape to the dealer every time it need the oil changing??

all ideas are welcome!!

no where ..

i wouldnt have thought you could get that unless you where a dealer

[BIG ANT]

ive only got till sept then it goes into nomans land with the warranty!

it would be so much easier just to plug in and do repairs without having to lug the rene in the back of the van and drive 100miles round trip for an oil change and remove the diagnostic message just to pick it up a week later and spend loads of cash doing it!!

when it could easily be done at home??

[BIG ANT]

i asked on lpsg but they were just talking a load of cock

[BIG ANT]

yes its emotional!

Anyway all i could find on the can am diagnostics plan is:

How to pull up codes on multifunction display!

1.turn on ignition to lights on position
2.set speedo to engine hours
3.press and hold sellector button while switching between hi / low beam 3 times in a row
4.diagnostics mode is activated
5.use selector button to go through codes
6.END will come up when all codes are displayed
7.to end mode hold the selector button for more than two seconds

i dont know if you can remove any warnings or service lights as i havent tried it yet??
let me know if anybody gives it a go??

[BIG ANT]

ive seen what he's done to his zilla???

[Big Jim]

Don't drag the Zilla in to this thread, it is about Can Am Diagnostics, well at least when you two can put your handbags away for more than 5 seconds

[BIG ANT]

jim im tryin to save us money here!!!!


mr 4 year warranty!!

[Big Jim]

jim im tryin to save us money here!!!!


mr 4 year warranty!!

If you think I would let you interfere with my ride you are clearly mistaken

[BIG ANT]

YOUV GOTTA GET ONE FIRST??